Sunday, March 17, 2013

How To Build Tents for a Historical or Warhammer Siege Encampment

How To Build Tents for a Historical or Warhammer Siege Encampment
Today we'll show you How to build tents for your besiegers encampment. You can't have soldiers and supplies standing about in the rain, so lets make them somewhere to stow their gear and have a respite.

How To Build Model Tents for a Siege Encampment
To start you'll need a base, we used some 12 inch foam to carve our hill. You'll also need a piece of fabric, something natural looking, three round toothpicks and a stick you can cut down. We cut a 3" and two 1.25" segments.

How To Build Model Tents for a Siege Encampment
Next we carved the hill into a rough shape that would hold a tent 3 inches long.

How To Build Model Tents for a Siege Encampment
We then notched a point at the ends of our short sticks for the uprights.

How To Build Model Tents for a Siege Encampment
After sanding the roughness off the hill, we measured the length of our support and placed the uprights into the foam. Once positioned we removed them, filled the hole with some glue and stuck them back in. Before it dried we glued the crossbar in place and pressed it together.

How To Build Model Tents for a Siege Encampment
We added some areas of glue and attached small rocks and a mix of sand and medium ballast.

How To Build Model Tents for a Siege Encampment
After it was set we painted the entire surface dark brown with sand in the paint for extra texture.

How To Build Model Tents for a Siege Encampment
When it dries, you can dry-brush on some layers of lighter browns and greens if you want a grassy knoll.

How To Build Model Tents for a Siege Encampment
Next make sure your material is the same length as your support, ours is 3", and trim the cloth to roughly a square. Fold it in half and crease it if you can. This will lie across the support.

How To Build Model Tents for a Siege Encampment
Take your round toothpicks and insert them into one of the sides at the corners and then the center.

How To Build Model Tents for a Siege Encampment
Clip off the extra length, leaving tent pegs behind.

How To Build Model Tents for a Siege Encampment
Using the pieces clipped off, repeat these steps on the other side. Be sure to keep the material tight.

How To Build Model Tents for a Siege Encampment
We added a few tufts of static grass for texture. and filled the supply tent with crates, barrels and sacks.

How To Build Model Tents for a Siege Encampment
And that's how to build tents for your besiegers.

How To Build Model Tents for a Siege Encampment
This one wound up being a siege supply tent.

How To Build Tents for a Historical or Warhammer Siege Encampment
Add more tents to a larger base for making bigger terrain pieces with additional scenery bits like trees and shrubs. We even have stumps from felled trees in this piece plus a campfire. The trebuchet is set up beside the camp for easier access to fire.

How To Build Tents for a Historical or Warhammer Siege Encampment
We'll leave you with a few additional photos and wish you a great battle!
The Old Crow

How To Build Tents for a Historical or Warhammer Siege Encampment
How To Build Tents for a Historical or Warhammer Siege Encampment


2 comments:

  1. Fantastic! I'll try to do the same one...great blog too!
    Phil.

    ReplyDelete
    Replies
    1. Thanks Phil, Glad you are enjoying the blog, we always
      appreciate the comments.

      Delete